CIMTEC Automation LLC
3030 Whitehall Park Drive
Charlotte, North Carolina 28273
Call Now: 1-704-248-9020
Toll Free: 1-866-599-6507
Email: sales@cimtec.org
Our engineers are standing by to help you. Click to chat.
|
Automation > GE Fanuc > GE Fanuc PAC systems RX7i PLC's
Check out our large GE Fanuc RX7i PLC Inventory!
GE Fanuc PAC systems RX7i PLC's |
|
PAC systems RX7i PLC |
RX7i CPUs
- Pentium III 300MHz and 700MHz CPUs
- 10 Megabytes of fully configurable user memory
- Two serial ports, one RS-232 and one RS-485 port, two 10/100Mbit Ethernet Ports with built-in switch (one IP address)
RX7i VME64
- 17 VME Slots Front and Back Mount
- Up to 4 times the speed of Series 90-70 backplane
- Supports existing Series 90-70 modules, VMIC modules, and 3rd Party VME boards
- Supports existing expansion racks and Genius networks
We will Ship today!
Call Now: 1-704-248-9020
Toll Free: 1-866-599-6507
Email: sales@cimtec.org
GE Fanuc PLC RX7i Inventory
RX7i Part # |
Description |
Stock |
| IC697VAL132 |
Analog Input, 12bit, 32 channel single ended or 16 channel differential, 0-20ma. Module has removable terminal block, no cable required |
1 |
| IC697VAL134 |
Analog Input, +/-5VDC, +/-10VDC, 0 to 10 VDC, 32 channel single ended or 16 channel differential. Module has removable terminal block, no cable required |
2 |
| IC697VAL216 |
Analog Input, 16 channel, jumper selectable for 0 to 5VDC, 0 to 10VDC, +/-2.5VDC, +/-5VDC, +/-10VDC. 16bit Resolution |
1 |
| IC697VAL232 |
Analog Input, 32 Channel, jumper selectable for jumper selectable for 0 to 5VDC, 0-10VDC, +/-2.5VDC, +/-5VDC, +/-10VDC. 16 bit resolution. |
4 |
| IC697VAL264 |
Analog Input, 64 Channel, jumper selectable for 0 to 5VDC, 0 to 10VDC, +/-2.5VDC, +/-5VDC, +/-10VDC. 16 bit resolution. |
2 |
| IC697VAL301 |
Analog Output, 12 bit 32 channel, 0-10VDC, 0-5VDC, +/-2.5VDC, +/-5VDC, +/-10VDC |
2 |
| IC697VAL304 |
Analog Output, Isolated, 4 channel, 12 bit, Voltage - bipolar +/-2.5VDC, +/-5VDC, +/-10VDC. Removable terminal block, no cable required |
1 |
| IC697VAL306 |
Analog Output, 12 bit, 16 channel, non isolated, Voltage/Current jumper selectable voltage 0-10VDC, 0-5VDC, +/-2.5VDC, +/-5VDC, +/-10VDC or Current 0 to 20mA, 4 to 20mA, and 5 to 25 mA |
1 |
| IC697VAL308 |
Analog Output, Isolated, 8 channel, 12 bit, Voltage - bipolar +/-2.5VDC, +/-5VDC, +/-10VDC. Removable terminal block, no cable required |
1 |
| IC697VAL314 |
Analog Output, Isolated, 4 channel, 12 bit, Current - 4 to 20mA. Removable temrinal block, no cable required |
1 |
| IC697VAL318 |
Analog Output, Isolated, 8 channel, 12 bit, Current - 4 to 20mA. Removable terminal block, no cable required |
2 |
| IC697VAL324 |
Analog Output, Isolated, 4 channel, 12 bit, Voltage - polar 0 -10VDC, 0-5VDC. Removable terminal block, no cable required |
2 |
| IC697VAL328 |
Analog Output, isolated, 8 channel, 12 bit, Voltage - polar 0-10VDC, 0-5VDC. Removable terminal block, no cable required |
3 |
| IC697VAL348 |
Analog Output, 8 channel, 16bit, Voltage bipolar 0 to +/-10VDC |
1 |
| IC697VDD100 |
Digital Input, 24VDC, Source, 64 point. In addition, the module can be configured for SOE (Sequence Of Event) recording. Up to 3,000 event buffer |
1 |
| IC697VDQ120 |
Digital Output, 64 point, 24VDC at 500mA, Sink or Source, 64 point |
1 |
| IC697VDR150 |
Relay Output, 32 point, non latching, 2 amp |
1 |
| IC697VDR151 |
Relay Output, 64 pint, non latching, 2 amp |
1 |
| IC697VRM015 |
Reflective Memory with 256Kbyte memory & 512 transfer FIFO. 170MBaud fiber optic network. Supports up to 256 nodes over 2,000 meters |
1 |
| IC697VSC096 |
Single Board Computer, with 32Mbyte SDRAM & 96 Mbyte Flash |
2 |
| IC698ACC701 |
Lithium Battery pack |
2 |
| IC698ACC720 |
RX7i Shielded Double Slot Faceplate (Package of 6) |
1 |
| IC698ACC735 |
RX7i Shielded Single Slot Faceplate (Package of 6) |
3 |
| IC698CHS017 |
RX7i 17 VME Slot Rack, Rear Mount |
3 |
| IC698CHS117 |
RX7i 17 VME Slot Rack, Front Mount |
3 |
| IC698CPE010 |
RX7i VME 300Mhz CPU with Embedded 10/100 Ethernet |
3 |
| IC698CPE020 |
RX7i VME 700Mhz CPU with Embedded 10/100 Ethernet |
3 |
| IC698ETM001 |
RX7i Ethernet Module 10/100, Auto Sensing, Auto Switching |
3 |
| IC698PSA100 |
RX7i PLC Power Supply, 85 to 264 VAC at 47 to 63 Hz Input, 100 Watt output |
2 |
| IC698PSA350 |
RX7i PLC Power Supply, 85 to 264 VAC at 47 to 63 Hz Input, 350 Watt output |
2 |
|
