Cognex Vision Part # |
Description |
| 300-0341-15 |
I/O Module Cable - 15" RJ-45 to DB-15 cable. PREREQUISITES: CIO-1350-0x -or- CIO-1450-0x |
| 300-0341-40 |
I/O Module Cable - 40" RJ-45 to DB-15 cable. PREREQUISITES: CIO-1350-0x -or- CIO-1450-0x |
| 300-0342-15 |
Straight through Ethernet Cable - 15" cable - For connecting In-Sight® to Ethernet switch. PREREQUISITES: Any In-Sight® 3000 Series |
| 300-0346-15 |
Ethernet Crossover Cable - 15" cable - For connecting In-Sight® to PC directly. PREREQUISITES: |
| 370-0252 |
DIN Mount Bracket. PREREQUISITES: Any In-Sight® 2000 or 3000 |
| 370-0253 |
Wall Mount Bracket. PREREQUISITES: Any In-Sight® 2000 or 3000 |
| 500-E1K104 |
APG 104MM LENS TUBE KIT METRIC. Note: APG 104MM LENS TUBE KIT METRIC |
| 500-E1K38 |
APG 38mm TUBE KIT FOR 500ENC/ENCG. Note: 38mm TUBE KIT FOR 500ENC/ENCG |
| 500-E1K50 |
APG 50MM TUBE KIT FOR 500ENC/ENCG. Note: 50mm TUBE KIT FOR 500ENC/ENCG |
| 500-E1K62 |
APG 62mm TUBE KIT FOR 500ENC/ENCG. Note: 62mm TUBE KIT FOR 500ENC/ENCG |
| 500-E1K89 |
APG 89mm TUBE KIT FOR 500ENC/ENCG. Note: 89mm TUBE KIT FOR 500ENC/ENCG |
| 500-ENC |
APG 500 ENCLSR STNLSS PLASTIC LENS. Note: Series 500 Enclosure |
| 500-ENC3AB |
APG 500-ENC3G W/EXT. UPPER BODY. Note: 500-ENC3G W/EXT. UPPER BODY |
| 500-ENC3G |
APG L3 SS ENCLOSURE - GLASS. Note: APG L3 SS ENCLOSURE - GLASS |
| 500-ENC3HM |
APG ENCLOSURE VITON GASKETS/SEALING. Note: APG ENCLOSURE VITON GASKETS/SEALING |
| 500-ENC3K |
APG SS ENC-COMP MOD KIT. Note: APG SS ENC.-COMP. MOD KIT |
| 500-ENC3KC |
APG 500-ENC3K w/EXT. UPPER BODY. Note: 500 Enclosure w/ext. upper body. |
| 500-ENC3KD |
APG COMPLETE CONV KIT (L3 TO 500-ENC3K). Note: APG COMPLETE CONV KIT (L3 TO 500-ENC3K) |
| 500-ENC3P |
APG L3 SS ENCLOSURE - POLYCARB. Note: APG L3 SS ENCLOSURE - POLYCARB |
| 500-ENC4G |
APG EXP PROOF ENC. GLASS. Note: APG Explosion Proof Enclosure |
| 500-ENCG |
APG 500 STNLSS ENCLSR GLASS LENS. Note: Series 500 Enclosure |
| 500-ENCGBC |
APG ENC W/GL VP 38MM TUBE LENS & 1/4 NPT. Note: APG ENC W/GL VP 38MM TUBE LENS & 1/4 NPT |
| 500-ENCHL |
APG ENCLOS WASHDOWN FOR SPECTRAL CAMERA. Note: APG ENCLOS WASHDOWN FOR SPECTRAL CAMERA |
| 500-ENCVPG |
APG GLASS VIEWPORT FOR 500-ENC. Note: APG GLASS VIEWPORT FOR 500-ENCG |
| 500ID-LGTKIT |
LGT KIT LEGEND SERIES IR DIFF. Note: DVT Infared Integrated Ringlight Kit, Diffuse |
| 500I-LGTKIT |
LGT KIT LEGEND SERIES IR. Note: DVT Infared Integrated Ringlight Kit |
| 500-PGNPT |
APG 1 NPT ADAPTER W/LOCKING RING & SEAL". Note: APG 1" NPT ADAPTER W/LOCKING RING & SEAL |
| 500RD-LGTKIT |
LGT KIT LEGEND SERIES RED DIFF. Note: DVT Red Integrated Light Kit, Diffuse |
| 500R-LGTKIT |
LGT KIT LEGEND SERIES RED. Note: DVT Red Integrated Light Kit |
| 500-STRN |
STRN RLF 500 SERIES. Note: LEGEND500 SERIES STRAIN RELIEF |
| 500-STRN2 |
APG PG29 CORD GRIP. Note: APG PG29 CORD GRIP |
| 500-STRN3 |
APG PG36 CORD GRIP W/LOCK RING & SEAL. Note: APG PG36 CORD GRIP W/LOCK RING & SEAL |
| 500WD-LGTKIT |
LGT KIT LEGEND SERIES WHITE DIFF. Note: DVT White Integrated Ringlight Kit, Diffuse |
| 500W-LGTKIT |
LGT KIT LEGEND SERIES WHITE. Note: DVT White Integrated Ringlight Kit |
| 510M |
DVT LEGEND 510M NO LGT. Note: Legend 510 SmartImage Sensor CMOS, no Reader SoftSensors |
| 510MR |
DVT LEGEND 510MR RED LGT. Note: Legend 510 SmartImage Sensor CMOS without Reader SoftSensors |
| 520M |
DVT LEGEND 520M NO LGT. Note: Legend 520 SmartImage Sensor CMOS |
| 520MR |
DVT LEGEND 520MR RED LGT. Note: Legend 520 SmartImage Sensor CMOS |
| 530M |
DVT LEGEND 530M NO LGT. Note: Legend 530 SmartImage Sensor |
| 530MCASE |
CASE LEGEND 530M. Note: LEGEND 530M CASE |
| 530MR |
DVT LEGEND 530MR RED LGT. Note: Legend 530 SmartImage Sensor |
| 530MRCASE |
CASE LEGEND 530MR. Note: LEGEND 530MR CASE |
| 540M |
DVT LEGEND 540M NO LGT. Note: Legend 540 High Speed SmartImage Sensor |
| 540MR |
DVT LEGEND 540MR RED LGT. Note: Legend 540 SmartImage Sensor with integrated light |
| 542C |
DVT LEGEND 542C NO LGT. Note: Legend 542C Color SmartImage Sensor |
| 542CW |
DVT LEGEND 542CW WHT LGT. Note: Legend 542C Color SmartImage Sensor w/ Light |
| 544C |
DVT LEGEND 544C NO LGT. Note: Legend 544C Hi-Res Color SmartImage Sensor |
| 544CW |
DVT LEGEND 544CW WHT LGT. Note: Legend 544C Hi-Res Color SmartImage Sensor w/ Light |
| 544M |
DVT LEGEND 544M NO LGT. Note: Legend 544 Hi-Res SmartImage Sensor |
| 544MR |
DVT LEGEND 544MR RED LGT. Note: Legend 544 High-Res SmartImage Sensor w/ Light |
| 550M |
DVT LEGEND 550M NO LGT. Note: Legend 550 Extreme Speed SmartImage Sensor |
| 550MR |
DVT LEGEND 550MR RED LGT. Note: Legend 550 High Speed SmartImage Sensor w light |
| 552C |
DVT LEGEND 552C NO LGT. Note: Legend 552C Color SmartImage Sensor |
| 552CW |
DVT LEGEND 552CW WHT LGT. Note: Legend 552C Color SmartImage Sensor w/ Light |
| 554C |
DVT LEGEND 554C NO LGT. Note: Legend 554C Hi-Res Color SmartImage Sensor |
| 554CW |
DVT LEGEND 554CW WHT LGT. Note: Legend 554C Hi-Res Color SmartImage Sensor w/ Light |
| 554M |
DVT LEGEND 554M NO LGT. Note: Legend 554 Hi-Res SmartImage Sensor |
| 554MR |
DVT LEGEND 554MR RED LGT. Note: Legend 554 High-Res SmartImage Sensor w/ Light |
| 600-BC1 |
600 Back Cover. Note: 600 BACK COVER |
| 600-ENC10 |
APG 600 10 SQR ENCLSR PLEXI FRONT". Note: 600 10 |
| 600-ENC10G |
APG 600 10 SQR ENCLSR GLASS FRONT". Note: 600 10 SQR ENCLSR GLASS FRONT" |
| 600-ENC13FA |
APG 600 13 ENCLSR W/ AIR CURTAIN". Note: 600 13 ENCLSR W/ AIR CURTAIN" |
| 600-ENC9 |
APG 600 9 ENCLOSURE". Note: Series 600 Enclosure |
| 600-ENC9F |
APG 600 9 ENCLSR W/AIR COOL". Note: Series 600 Enclosure with air |
| 600-ENC9FA |
APG 600 9 ENCLSR W/AIR CURTAIN". Note: Series 600 Enclosure with air and air curtain |
| 600-ENC9FI |
APG 9 ENCLSR AIR COOL KG1 I-R GLS". Note: 9 ENCLSR AIR COOL KG1 I-R GLS" |
| 600-ENC9G |
APG GLASS FRNT PLT FOR 600-ENC9xx. Note: GLASS FRNT PLT FOR 600-ENC9xx |
| 600-ENCPL |
APG I-R ABSORBING GLASS 600-ENCxx. Note: IR Absorbing Glass for 600-ENCxx |
| 600-FC1 |
CVR FRONT 600 SERIES. Note: 600 Front Cover |
| 630-C3E40 |
DVT SERIES 600 - MODEL 630 NO LGT. Note: Series 600 SmartImage Sensor |
| 630-C3E4M |
DVT SERIES 600 - MODEL 630 LGT CONN. Note: Series 600 with modified front |
| 800-5746-1 |
In-Sight® Control Pad Control Pad for use with In-Sight® 2000,
3000, or 3400 |
| 800-5785-1 |
In-Sight 4100 Accessory Kit Includes:
- DIN Rail Adapter and mounting hardware
- Remote head mounting bracket
- Remote head extension ring (5mm) |
| 800-5808-1 |
In-Sight® 3400 Remote Head Assembly |
| 800-5813-1 |
In-Sight® 3400 Accessory Kit Includes:
- Remote head mounting bracket
- Remote head extension ring (5mm)
- Vibration dampener assemblyPREREQUISITES: Note: This item is included with the ISS-3400-00 |
| ACC-24I |
DVT 24V 2A IND POWER SUPPLY. Note: DVT 24VDC Power Supply |
| ACC-AA |
BOGEN ARTICULATED ARM. Note: Bogen Articulation Arm |
| ACC-CS |
BESELER COPY STAND. Note: Besseler Copy Stand |
| ACC-MA |
BOGEN MAGIC ARM. Note: Bogen Magic Arm |
| ACC-MC |
BOGEN MINI CLAMP. Note: Bogen Mini Clamp |
| ACC-SC |
BOGEN SUPER CLAMP. Note: Bogen Super Clamp |
| BCS-3800-00 |
Linear Barcode Handheld Scanner -Handheld linear scanner
-Null modem cable to connect to In-Sight®
-Auto-ranging 110-220V power supply with US AC line cord -Documentation. PREREQUISITES: Any In-Sight® 1000, 1000C, 2000 or 3000 system |
| BCS-4600-00 |
2D Handheld Scanner(RS-232) -Handheld 2D linear scanner (RS-232)
-Null modem cable to connect to In-Sight®
-Auto-ranging 110-220V power supply with US AC line cord
-PREREQUISITES: Any In-Sight® 1000, 1000C, 2000,or 3000 system |
| BCS-4600-01 |
2D Handheld Scanner(Kybd Wedge) -Handheld 2D linear scanner(Kybd Wedge)
-Null modem cable to connect to In-Sight®
-Auto-ranging 110-220V power supply with US AC line cord
-PREREQUISITES:Any In-Sight® 1000,1000C,2000,or3000 system |
| BCS-4600-STAND |
Stand for BCS-4600 Scanner |
| BKT-500D |
BRACKET 500 SERIES COPY STAND. Note: Series 500 Bracket |
| BKT-500I |
BRACKET 500 SERIES INSTALL. Note: Series 500 Bracket (Industrial) |
| BKT-5PT |
APG PAN & TILT MOUNT FOR 500 SERIES. Note: PAN&TILT MOUNT FOR 500 SERIES |
| BOX600 |
BOX FOR 600 SERIES WITH FOAM. Note: BOX FOR 600 SERIES WITH FOAM DVT LIST PRICE $10.00 EACH |
| CBL0-C06R |
CBL DB-9/DB-9 RS-232 SHLD 6". Note: RS-232 Serial Cable, 6" |
| CBL5-D10 |
CBL PWR I/O 500 SERIES 10". Note: Series 500 I/O & Power Cable |
| CBL5-D25 |
CBL PWR I/O 500 SERIES 25". Note: 25" Digital IO cable for 500 Series |
| CBL5-D50 |
CBL PWR I/O 500 SERIES 50". Note: 50" Digital IO & Power Cable for 500 Series |
| CBL6-C104 |
CBL RS422 10". Note: RJ11 Cable - 10 ft |
| CBL6-C254 |
CBL RS422 25". Note: RJ11 Cable - 25 ft |
| CBL6-C504 |
CBL RS422 50". Note: RJ11 Cable - 50 ft |
| CBL6-D10 |
CBL PWR I/O 600 SERIES 10". Note: Series 600 15 Pin I/O Cable |
| CBL6-D25 |
CBL PWR I/O 600 SERIES 25". Note: Series 600 15 Pin I/O Cable |
| CBL6-D50 |
CBL PWR I/O 600 SERIES 50". Note: Series 600 15 Pin I/O Cable |
| CBL6-P18RT |
CBL RNG LGT 600 SERIES 18". Note: Series 600 Ring light primary illumination cable |
| CBL6-P30RT |
CBL RNG LGT 600 SERIES 30". Note: 30" RING LIGHT CABLE |
| CBL6-P50RT |
CBL RNG LGT 600 SERIES 50". Note: Series 600 Illumination Cable |
| CBL-C100E |
CBL ENET CAT 5E SHLD 100". Note: Ethernet Cable 100" 500 & 600 Series |
| CBL-C10E |
CBL ENET CAT 5E SHLD 10". Note: Ethernet Cable 10 feet/500 & 600 Series |
| CBL-C10EX |
CBL ENET CROSSOVER 10". Note: Ethernet Crossover Cable/500 & 600 Series |
| CBL-C25E |
CBL ENET CAT 5E SHLD 25". Note: Ethernet Cable 25'/500 & 600 Series |
| CBL-C50E |
CBL ENET CAT 5E SHLD 50". Note: Ethernet Cable 50'/500 & 600 Series |
| CBL-C50EX |
CBL ENET CROSS 50". Note: Ethernet Crossover Cable/500 & 600 Series |
| CBLI-24VDEU |
CBL PWR FL BLK EUROPE. Note: EUROPEAN POWER CABLE FOR USE W/ACC-24I |
| CBLI-24VDJP |
CBL PWR FL BLK JAPAN. Note: JAPANESE POWER CABLE FOR USE W/ACC-24I |
| CBLI-24VDUK |
CBL PWR FL BLK UK. Note: UK POWER CABLE FOR USE W/ACC-24I |
| CBLI-24VDUS |
CBL PWR FL BLK US. Note: NORTH AMERICAN PWR CAB FOR USE W/ACC-24I |
| CBL-P18 |
CBL DVT SMART LIGHT 18". Note: Primary Ill. Cable/500 & 600 |
| CBL-S00P2 |
CBL CBL-S00P2. Note: 2 Port Ill. Splitter /500 & 600 Series |
| CBL-S05P4 |
CBL CBL-S05P4. Note: 4 Port Ill. Splitter/ 500 & 600 Series |
| CBL-S06 |
CBL CBL-S06. Note: Secondary Ill. CABLE/500 & 600 |
| CBL-S18 |
CBL CBL-S18. Note: Secondary Ill. Cable 500 & 600 Series |
| CBL-XC10E |
CBL ENET SHLD M12-8/RJ45 SHLD 10". Note: Industrial Ethernet Cable for XE-55X Systems |
| CBL-XC25E |
CBL ENET SHLD M12-8/RJ45 SHLD 25". Note: Extreme Environment Ethernet Cable |
| CBL-XD10 |
CBL PWR I/O M12-8/HD-15 SHLD 10". Note: 10 feet Power I/0 Cable for XE-55x Systems |
| CBL-XD25 |
CBL PWR I/O M12-8/HD-15 SHLD 25". Note: Extreme Enviroment IO Cable |
| CCB-84909-0193-15 |
Ethernet Cable - 15" cable
- For connecting to Ethernet switch
- M12 to RJ-45 |
| CCB-84909-0199-06 |
Camera Cable - 6" cable |
| CCB-84909-0200-15 |
Camera Cable - 15" cable |
| CCB-84909-0201-30 |
Camera Cable - 30" cable |
| CCB-84909-0202-50 |
Camera Cable - 50" cable |
| CCB-84909-0203-99 |
Ethernet Cable - 99" cable
- For connecting to Ethernet switch
- M12 to RJ-45 |
| CCB-84909-0204-30 |
I/O Module Cable - 30" cable
- M12 to DB-15. PREREQUISITES: CIO-1350-1x -or-
CIO-14x0-1x |
| CCB-84909-0205-50 |
I/O Module Cable - 50" cable
- M12 to DB-15. PREREQUISITES: CIO-1350-1x -or-
CIO-14x0-1x |
| CCB-84909-0206-30 |
Power & I/O Breakout Cable - 30" cable
- M12 to Bare Wires |
| CCB-84909-0207-50 |
Power & I/O Breakout Cable - 50" cable
- M12 to Bare Wires |
| CCB-84909-0208-06 |
Power & I/O Breakout Cable - 6" cable
- M12 to Bare Wires |
| CCB-84909-0209-15 |
Power & I/O Breakout Cable - 15" cable
- M12 to Bare Wires |
| CCB-84909-0210-30 |
Ethernet Cable - 30" cable
- For connecting to Ethernet switch
- M12 to RJ-45 |
| CCB-84909-0211-50 |
Ethernet Cable - 50" cable
- For connecting to Ethernet switch
- M12 to RJ-45 |
| CCB-84909-0212-06 |
I/O Module Cable - 6" cable
- M12 to DB-15. PREREQUISITES: CIO-1350-1x -or-
CIO-14x0-1x |
| CCB-84909-0213-15 |
I/O Module Cable - 15" cable
- M12 to DB-15. PREREQUISITES: CIO-1350-1x -or-
CIO-14x0-1x |
| CCB-84909-0214-06 |
Ethernet Cable - 6" cable
- For connecting to Ethernet switch
- M12 to RJ-45 |
| CIA-ENET-100 |
In-Sight® 1700 Display Adapter - Ethernet Display Adapter for In-Sight® 1700. PREREQUISITES: Any In-Sight® 1700 |
| CIA-ENET-200 |
Prober ID Kit Display Adapter - Ethernet Display Adapter for In-Sight® 1701 Prober ID Kit. PREREQUISITES: |
| CIM-ENET-121 |
Ethernet Workstation 12.1" display - Panel mount PC pre-loaded with In-Sight®
software & Windows 2000
- 12" display, 800 x 600 Resolution. PREREQUISITES: Any In-Sight® series with Ethernet support |
| CIM-ENET-15 |
Ethernet Workstation, 15" display - Panel mount PC pre-loaded with In-Sight®
software & Windows 2000
- 15" display, 1024 x 768 Resolution. PREREQUISITES: Any In-Sight® series with Ethernet support |
| CIM-LCD-104 |
10.4" Industrial Flat Panel LCD Monitor - 24v/25w Input
- Requires 24v power supply
- Includes VGA cable
- NEMA4/12 front end
- 640 x 480 resolution. PREREQUISITES: Any In-Sight® 2000 -or- 3000 -or-
3400 |
| CIM-LCD-151 |
15.1" Industrial Flat Panel Monitor - 90-260 VAC input
- Requires no power supply
- Includes VGA cable
- NEMA 4/12 front end
- 1024 x 768 resolution. PREREQUISITES: Any In-Sight® 2000 -or- 3000 -or-
3400 |
| CIM-LCD-64 |
6.4" Industrial Flat Panel LCD Monitor |
| CIO-1350-00 |
In-Sight® Breakout Module - 15" RJ45 to DB15 cable (300-0341-15)
- I/O module
- Documentation. PREREQUISITES: Any In-Sight® 1000 or 4000 series
-or- In-Sight® Wafer Reader |
| CIO-1350-01 |
In-Sight® Breakout Module - 40" RJ45 to DB15 cable (300-0341-40)
- I/O module
- Documentation. PREREQUISITES: Any In-Sight® 1000 or 4000 series
-or- In-Sight® Wafer Reader |
| CIO-1350-10 |
In-Sight® Breakout Module - 15" M12 to DB15 cable (CCB-84909-0213-15)
- I/O module
- Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1350-11 |
In-Sight® Breakout Module - 50" M12 to DB15 cable (CCB-84909-0205-50) - I/O module - Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1450-00 |
In-Sight®I/O Expansion Module - 15" RJ45 to DB15 cable(300-0341-15)-Adds 8 inputs and 8 outputs to existing I/O
-Adds RS-232 w/RTS/CTS handshaking
-PREREQUISITES: Any In-Sight® 1000 or 4000 series or In-Sight®Wafer Reader |
| CIO-1450-01 |
In-Sight® I/O Expansion Module - 40" RJ45 to DB15 cable (300-0341-40)
-Adds 8 inputs and 8 outputs to existing I/O
-Adds RS-232 w/RTS/CTS handshaking
-PREREQUISITES: Any In-Sight® 1000/4000 series or In-Sight® Wafer Reader |
| CIO-1450-10 |
In-Sight® I/O Expansion Module - 15" M12 to DB15 cable (CCB-84909-0213-15) - Adds 8 inputs and 8 outputs to existing I/O - Adds RS-232 w/RTS/CTS handshaking - Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1450-11 |
In-Sight® I/O Expansion Module - 50" M12 to DB15 cable (CCB-84909-0205-50) - Adds 8 inputs and 8 outputs to existing I/O - Adds RS-232 w/RTS/CTS handshaking - Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1450-12 |
In-Sight® I/O Expansion Module - 30" M12 TO DB15 cable (CCB-84909-0210-30) - Adds 8 inputs and 8 outputs to existing I/O - Adds RS-232 w/RTS/CTS handshaking - Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1460-06 |
In-Sight® I/O Expansion Module - 6" M12 to DB15 cable (CCB-84909-0212-06) - Adds 8 inputs and 10 outputs to existing I/O - Adds RS-232 w/RTS/CTS handshaking - Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1460-15 |
In-Sight® I/O Expansion Module - 15" M12 to DB15 cable (CCB-84909-0213-15)
- Adds 8 inputs and 10 outputs to
existing I/O
- Adds RS-232 w/RTS/CTS handshaking
- Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1460-30 |
In-Sight® I/O Expansion Module - 30" M12 to DB15 cable (CCB-84909-0204-30)
- Adds 8 inputs and 10 outputs to
existing I/O
- Adds RS-232 w/RTS/CTS handshaking
- Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1460-50 |
In-Sight® I/O Expansion Module - 50" M12 to DB15 cable (CCB-84909-0205-50)
- Adds 8 inputs and 10 outputs to
existing I/O
- Adds RS-232 w/RTS/CTS handshaking
- Documentation. PREREQUISITES: In-Sight® 3400 or 5000 series |
| CIO-1460-MODS |
In-Sight® Spare Modules Kit - 4 input modules
- 6 output modules
- 5 fuses. PREREQUISITES: In-Sight® 1460 I/O Expansion Module |
| CIO-2350-00 |
In-Sight® I/O Expansion Module - 8-channel I/O expansion module
- 7" I/O expansion module cable
- Installation documentation (all languages). PREREQUISITES: Any In-Sight® 2000 or 3000 |
| CIO-2550-00 |
DeviceNet Gateway Module RS-232 to DeviceNet Gateway
Use with In-Sight®2000,3000.Required:300-0281-15(Cable),300-0277-08(Adapter).Use with In-Sight®1000,3400,4000,5000series requires CIO-1450-xy,185-0079 cable,full RTS/CTS capabilities. |
| CKR-101-00 |
Checker™ 101 Sensor |
| CKR-BKTADJE-101-00 |
Checker™ 101 Adjustable Mounting Bracket - English threads (1/4 - 20) |
| CKR-BKTADJM-101-00 |
Checker™ 101 Adjustable Mounting Bracket - Metric threads (M6) |
| CKR-BKTSTD-101-00 |
Checker™ 101 Standard Mounting Bracket |
| CKR-IOBOX-101 |
Checker™ 101 I/O Module. PREREQUISITES: Any Checker 101 |
| CKR-LENSKIT-101-00 |
Checker™ 101 Lens Kit - Includes: 3.6mm lens, 8.0mm lens, 16.0mm lens, and (4) lens spacers. PREREQUISITES: |
| CKR-REPAIRKIT-101 |
Checker™ 101 Repair Kit Consists of: 1/3" 5.8 lens, USB Plug, Mounting Screws, Allen Wrench. PREREQUISITES: Any Checker 101 |
| CLA-1000-00 |
Strobe Light Control Adapter (AI) - Provides strobing capability to an In-Sight®
2000 or 3000
- .01 to 1.9 pulse width. PREREQUISITES: For use with any In-Sight® 2000 -or-
3000 -and- any AI CLM |
| CLA-2000-01 |
Single Light Variable Cable Adapter (AI) - Provides connectivity between an In-Sight®
2000 or 3000 and any AI light module
that Cognex sells. PREREQUISITES: For use with any In-Sight® 2000 -or-
3000 -and- any AI CLM |
| CLA-400-00 |
Power Supply for AI CLMs (AI) - Does not include strobe
- 120-240 VAC input
- 24v/30 Watt output
- Provides 2 light channel outputs. PREREQUISITES: For use with any AI CLM |
| CLA-4000-00 |
Power Supply & Strobe for AI CLMs (AI) - Provides 1 light channel output
- Input: 24v/1.25amp
- Output: Continuous max 40amp @ 30v,
Impulse: max 4amp @ 120v
- .01 to 64ms pulse width. PREREQUISITES: For use with any AI CLM |
| CLA-6000-00 |
Power Sup & Strobe for AI CLMs (AI) - Provides 2 light channel outputs
- Input 24v/1.25amp
- Output continuous: max 40amp @ 30v
Impulse: max 4amp @ 100v
- .01 to 64ms pulse width. PREREQUISITES: For use with any AI CLM |
| CLA-CB2-00 |
Extension Cable (CCS) - 6" 12v extension cable.
- For use with any CCS 12v CLM. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
any 12v CCS CLM. |
| CLA-CB5-00 |
Extension Cable (CCS) - 15" 12v extension cable.
- For use with any CCS 12v CLM. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
any 12v CCS CLM. |
| CLA-CBF2-00 |
4 Branch Extension Cable (CCS) - For use with 12v lights
- 6.5" long. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx -or-
CLA-PTU3012-xx power supply |
| CLA-CBW-00 |
Y Cable (CCS) - 14" 12v CCS power supply Y cable
- Combined power of lights must be less than
power supply/. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
any 12v CCS CLM. |
| CLA-CS100-00 |
Power Adapter (AI) - 24vdc input, 14.4w Output
- No strobing support
- Requires 24v power source. PREREQUISITES: For use with any AI CLM |
| CLA-DFLDL130X15-00 |
Diffusion Plate for CLM-LDL130X15-00. PREREQUISITES: CLM-LDL130X15-00 |
| CLA-DFLDL42X15-00 |
Diffusion Plate for Bar Light (CCS) - Attaches to CLM-LDL42X15-00 light
to shine from glossy work |
| CLA-DFLDL74X27-00 |
Diffusion Plate for CLM-LDL74X27. . PREREQUISITES: CLM-LDL74X27N -or- CLM-LDL74X27SW |
| CLA-FCB2-00 |
Power Supply Extension Cable (CCS) - 6.5" 24v CCS power supply extension cable. PREREQUISITES: CLA-PD3024 -or- CLA-5024-00
-or- CLA-PB2430-00 power supplies
-and- any 24v CCS CLM |
| CLA-FCB5-00 |
Power Supply Extension Cable (CCS) - 15" 24v CCS power supply extension cable. PREREQUISITES: CLA-PD3024 -or- CLA-5024-00 -or-
CLA-PB2430-00 power supplies
-and- any 24v CCS CLM |
| CLA-FCBF2-00 |
4 Branch Extension Cable (CCS) - For use with 24v lights
- 6.5" long. PREREQUISITES: CLA-PD3024-00 -or-
CLA-5024-00 -or- CLA-PB2430-00
power supplies |
| CLA-FCBW-00 |
Power Supply Y Cable (CCS) - 14" 24v CCS power supply Y cable. PREREQUISITES: CLA-PD3024 -or- CLA-5024-00 -or-
CLA-PB2430-00 power supplies
-and- any 24v CCS CLM |
| CLA-FCBW2-00 |
2 Branch Extension Cable (CCS) - For use with 24v lights
- 6.5" long. PREREQUISITES: CLA-PD3024-00 -or-
CLA-5024-00 -or- CLA-PB2430-00
power supplies |
| CLA-FRCB5-00 |
High Flex Extension Cable (CCS) - 5 meter, 24v
- 3 week lead-time. PREREQUISITES: For use in high flex situations |
| CLA-NFCB3-00 |
CCS Power Supply Phono Jack Control Cbl. PREREQUISITES: CLA-PD1012-00 -or-
CLA-PD3012-00 -or-
CLA-PD3024-00 -or-
CLA-PD5024-00 power supplies |
| CLA-PB2430-00 |
Power Adapter (CCS) - 24vdc input, 50w max input
- 12v & 24v outputs, line1: 24w, line2: 24w
(sum of line1 & line2 must be less than 30w)
- No strobing support
- Requires 24v power source |
| CLA-PD1012-00 |
Power Supply (CCS) - 100-120 VAC input
- 12v/9.5w output
- No strobing support
- Manual & external light control
- Provides 1 light channel output. PREREQUISITES: For strobing, CLA-STU3000-00 is required |
| CLA-PD3012-00 |
Power Supply (CCS) - 100-240 VAC input
- 12v/28w output
- No strobing support
- Manual & external light control
- Provides 2 light channel outputs. PREREQUISITES: For strobing, CLA-STU3000-00 is required |
| CLA-PD3012-2-00 |
Power Supply (CCS) - 100-240 VAC input
- 12v/28w output
- No strobing support
- Manual & external light control
- Provides 2 independent light channel outputs. PREREQUISITES: For strobing, CLA-STU-3000-00 is required |
| CLA-PD3024-00 |
24v Power Supply (CCS) - 100-240 VAC input
- 24v/28w output
- No strobing support
- Manual & external light control
- Provides 2 light channel outputs<br/>PREREQUISITES: For strobing, CLA-STU3000-00 is required |
| CLA-PD30248-2-00 |
24v Power Supply (CCS) - 100-240 VAC input
- 24v/25w output
- No strobing support
- Manual & external light control
- Provides 2 independent light channel outputs
PREREQUISITES: For strobing, CLA-STU3000-00 is required |
| CLA-PD5024-00 |
Power Supply (CCS) - 100-240 VAC input
- 24v/50w output
- No strobing support
- Manual & external light control
- Provides 2 light channel outputs
PREREQUISITES: For strobing, CLA-STU3000-00 is required |
| CLA-PLV10053-00 |
Power Supply for CLM-HLV27xx-00 (CCS) - 100-120 VAC input
- 5v/5.8w output
- 1 week lead-time. PREREQUISITES: CLM-HLV27xx-00 |
| CLA-PLV24101-00 |
Power Supply for CLM-HLV27BL-00 (CCS) - Input: 24v, 2.7w
- Output: 0 - 385mA. PREREQUISITES: CLM-HLV27BL-00 |
| CLA-PS3012D24-00 |
Power Supply Adapter with Overdrive (CCS) 24v input, 12v output |
| CLA-PTU3012-00 |
Power Supply and Strobe Adapter Combo - Input: 100-240 VAC,Output: 12v, 80mA Max per circuit,2 circuits, 28 Watts Max
-5mA photocoupler input
-0.01-99 msec Pulse Width
-2 independent strobing circuits
-Ability to overdrive LEDs |
| CLA-PTU3024-00 |
Power Supply and Strobe Adapter Combo -Input: 100-240 VAC,Output: 24v, 80mA Max per circuit
-2 circuits, 28 Watts Max
-5mA photocoupler input
-0.01 - 99msec Pulse Width
-2 independent strobing circuits
-Ability to overdrive LEDs |
| CLA-RB22-00 |
Adapter Cable (CCS) - 1 week lead-time. PREREQUISITES: For use with CLM-HLVx light -and-
CLA-PD3024-00 power supply |
| CLA-STCB-253-00 |
Control Cable (CCS) - 3 meters. PREREQUISITES: CLA-PTUx power supply |
| CLA-STU3000-00 |
Strobe Adapter (CCS)-Strobe adapter
-4mA photocoupler input
-.01-99.99ms pulse width
-This is not a power supply, works in conjunction with any CLA-PDxxxx-00 power supply,CCS,CLM light module
PREREQUISITES:CLA-PDxxxx-00 |
| CLK-003630-00 |
630nm Low Angle Ring Light - IP67 Rated
- 3.8" OD
- 24v/7.2w |
| CLK-3010-00 |
Fluorescent Ring Illuminator Kit (S&Y) - 3.8" O.D. circular 25kHz high frequency
fluorescent light module
- 120 VAC 50/60Hz power supply
- Polarizer with integral analyzer
- Documentation |
| CLK-3010-01 |
Fluorescent Ring Illuminator Kit (S&Y) - 3.8 O.D. circular 25kHz high frequency
fluorescent light module
- 220VAC 50/60Hz power supply
- Polarizer with integral analyzer
- Documentation |
| CLK-LDL130X15SW-00 |
White Bar Light Kit (CCS) - 130mm x 15mm line
- White Bar Light illumination
- Kit includes light polarizing plate
- 24v/6.5w. PREREQUISITES: CLA-PD3024 power supply -and-
CLA-FCBx-00 cable. |
| CLK-LDL42X15SW-00 |
White Bar Light Kit (CCS) - 42mm x 15mm line illumination
- White Bar Light illumination
- Kit includes light polarizing plate
- 24v/2.1w. PREREQUISITES: CLA-PD3024 power supply -and-
CLA-FCBx-00 cable |
| CLK-LDR250RD-00 |
Direct Ring Light Kit (CCS) - 50mm outer diameter - Red Ring Light - 12v/3.0w - Diffuser - Adapter RingPREREQUISITES: CLA-PD3012-00 power supply -or- CLA-PB2430-00 power adapter -and- CLA-CBx-00 cable. |
| CLK-LDR270RD-00 |
Direct Ring Light Kit (CCS) - 70mm outer diameter - Red Ring Light - 12v/6w - DiffuserPREREQUISITES: CLA-PD3012-00 power supply -or- CLA-PB2430-00 power adapter -and- CLA-CBx-00 cable. |
| CLK-LDR270SW-00 |
White Ring Light Kit (CCS) - 70mm outer diameter - White Ring Light - Kit includes light polarizing plate. PREREQUISITES: CLA-PD3024 power supply -and- CLA-FCBx-00 cable |
| CLK-LDR290RD-00 |
Direct Ring Light Kit (CCS) - 90mm outer diameter - Red Ring Light - 12v/9w - Diffuser - Adapter RingPREREQUISITES: CLA-PD3012-00 power supply -or- CLA-PB2430-00 power adapter -and- CLA-CBx-00 cable. |
| CLK-LDR290SW-00 |
White Ring Light Kit (CCS) - 90mm outer diameter - White Ring Light - Kit includes light polarizing plate and adapter - 24v/15w. PREREQUISITES: CLA-PD3024 power supply -and- CLA-FCBx-00 cable |
| CLK-LFL100SW-00 |
White Back Light Kit (CCS) - 100mm x 80mm - White Back Light - 24v/5.8w. PREREQUISITES: CLA-PD3024 power supply -and- CLA-FCBx-00 cable |
| CLK-LFV50ASW-00 |
White Coaxial Light Kit (CCS) - 50mm illumination window - White Coaxial Light - Kit includes light polarizing plate - 24v/6.1w. PREREQUISITES: CLA-PD3024 power supply -and- CLA-FCBx-00 cable |
| CLM-1236880100L-00 |
LED Infrared Spot Light (AI) - Spot Light Infrared - 100mm standoff - 15" cable. PREREQUISITES: CLA-2000-01 -or- CLA-1000-00 -or- CLA-400-00 -or- CLA-4000-00 -or- CLA-6000-00 -or- CLA-CS100-00 |
| CLM-1660-00 |
Dark Field Light Kit(AI) -LED dark field light module
-101mm inner ring light diameter
-Mounting bracket
-15" cable
PREREQUISITES:CLA-2000-01,CLA-1000-00 or CLA-400-00,LA-4000-00 or CLA-6000-00,CLA-CS100-00 |
| CLM-2420-00 |
Spot Light Kit (AI) - LED spot light
- Covers up to 50mm at a distance of 100mm
- 15" cable
- Documentation. PREREQUISITES: CLA-2000-01 -or- CLA-1000-00 -or-
CLA-400-00 -or- CLA-4000-00 -or-
CLA-6000-00 -or- CLA-CS100-00 |
| CLM-2449-00 |
Diffuse Light Kit (AI) LED on-axis diffuse light module
-52mm illumination window
-Mounting bracket
-15" cable
-PREREQUISITES: CLA-2000-01/ CLA-1000-00/ CLA-400-00 / CLA-4000-00 or CLA-6000-00 / CLA-CS100-00 |
| CLM-4260-00 |
Ring Light Kit(AI)Replaces CLM-4236-00(w/different mounting hardware 2x as bright),LED ring light module,100mm outer diameter ring light,Mounting bracket,15"processor to light cable. PREREQUISITES:CLA-1000-00/CLA-2000-00,CLA-400-00/CLA-4000-00,CLA-6000-00 |
| CLM-4401-00 |
Back Light Kit (AI) - LED Back light module
- 100mm x 100mm back light
- 15" cable
- Documentation. PREREQUISITES: CLA-2000-01 -or- CLA-1000-00 -or-
CLA-400-00 -or- CLA-4000-00 -or-
CLA-6000-00 -or- CLA-CS100-00 |
| CLM-4554-00 |
Linear Array Light Kit (AI)LED linear array light module
-233mm x 20mm line illumination
-15" cable
-PREREQUISITES: CLA-2000-01 / CLA-1000-00 or CLA-400-00 / CLA-4000-00 or CLA-6000-00 / CLA-CS100-00 |
| CLM-580662524LL-00 |
High Intensity Line Light - Red (AI) - 171.3 x 33.8 x 27.9mm line light, 24v, 15" cable, Documentation. PREREQUISITES: CLA-2000-01 -or- CLA-1000-00 -or-
CLA-400-00 -or- CLA-4000-00 -or-
CLA-6000-00 -or- CLA-CS100-00 |
| CLM-7248-00 |
Dome Light Kit (AI)LED dome light module
-Covers area up to 80mm
-Mounting bracket
-15" processor to light cable
-PREREQUISITES:CLA-1000-00 / CLA-2000-00 or CLA-400-00 / CLA-4000-00 or CLA-6000-00 / CLA-CS100-00 |
| CLM-ADLDR90 |
Adapter for 90mm Direct Ring Light (CCS) |
| CLM-BL88WHI-00 |
8" x 8" Monster Back Light - White Strobe or Continuous. 24VDC |
| CLM-DL2925WHI-00 |
29.25" Monster Dome Light White 29.25" Dome Light, 24v |
| CLM-DL725WHI-00 |
7.25" Monster Dome Light White 7.25" Dome Light, 24v |
| CLM-FPQ75-00 |
Red Low Angle Diffused Square Light CCS - Outer diameter 75mm, Inner diameter 75mm
- 24v/4.9w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-FPQ75BL-00 |
Low Angle Square Diffused Light, Blue - 75mm x 75mm
- 24v/4.9w
- 1 week lead-time. PREREQUISITES: CLA-PD3024 power supply -and-
CLA-FCBx-00 cable |
| CLM-FPR100-00 |
Low Angle Diffused Ring Light (CCS) - Outer diameter 100mm, Inner diameter 73mm
- 12v/6w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-HLV27BL-00 |
Blue Spot Light (CCS) - 8mm OD, 12mm Long
- 12v/1.6w
- 1 week lead-time. PREREQUISITES: CLM-PLV24101-00 power supply |
| CLM-HLV27RD-00 |
Red Spot Light (CCS) - Outer size 27 x 50 point 8
- 0.35a/1.4w
- 1 week lead-time. PREREQUISITES: CLA-PLV1005x-00 -and-
CLA-FCBx-00 -or- CLA-PD3024-00
-and- CLA-RB22-00 -and-
CLA-FCBx-00 |
| CLM-LDL130X15-00 |
Red Direct Bar Light (CCS) - 130mm x 15mm bar light
- 12v/4.8W. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDL180X16 |
Red Bar Light (CCS) Bar Light (Red), 180mm x 16mm, 24v/6/6w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDL247X16-00 |
Direct Bar Light (CCS) - 24mm x 16mm bar light
- 12v/9w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDL34X8-00 |
Red Direct Bar Light (CCS) 34mm x 8mm line illumination. 12v/1.2w |
| CLM-LDL42X15-00 |
Direct Bar Light (CCS) - 42mm x 15mm line illumination
- Red Bar Light illumination
- 12v/2.1w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDL42X15BL |
Blue Bar Light (CCS) - 42mm x 15mm line illumination
- Blue Bar Light illumination
- 24v/2.1w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDL42X15SW-00 |
White Bar Light (CCS) - 42mm x 15mm line illumination
- White Bar Light illumination
- 24v/2.1w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDL74X27N-00 |
Red Direct Bar Light (CCS) - 74mm x 27mm bar light
- 12v/5.4w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDL74X27SW |
White Direct Bar Light (CCS) - 74mm x 27mm bar light
- 12v/5.4w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDLTP100100-00 |
Back Light (CCS) - 100mm x 100mm back light
- 12v/17w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDLTP211200-00 |
Back Light (CCS) - 211mm x 200mm back light
- 24v/36w. PREREQUISITES: CLA-PD5024-00 power supply -and-
CLA-FCBx-00 cable. |
| CLM-LDLTP250X190 |
Large LED Back Light (CCS) - Lighted area 250mm x 190mm
- 24v/46w. PREREQUISITES: CLA-PD5024-00 power supply -and-
CLA-FCBx-00 cable. |
| CLM-LDLTP27X27-00 |
Back Light (CCS) - 27mm x 27mm back light
- 12v/1.1w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDLTP51X51-00 |
Back Light (CCS) - 51mm x 51mm back light
- 12v/4.4w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDM90A-00 |
Dome Light (CCS) - 90mm dome light
- 12v/17w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDQ100A-00 |
4 Bar Array Light Red (CCS) - Size 108mm x 108mm
- 12v/6w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDQ100ASW-00 |
4 Bar Array White Light (CCS) - Size 108mm x 108mm
- 24v/8.2w . PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDQ150A-00 |
4 Bar Array Light Red (CCS) - Size 148mm x 148mm
- 12v/12w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR146LA1-00 |
Dark Field Red Ring Light (CCS) - 146mm outer diameter dark field red light
- 12v/4.8w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR206LA1-00 |
Dark Field Red Ring Light (CCS) - 206mm outer diameter dark field red light
- 12v/7.2w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR2100RDLA-00 |
Red Low Angle Ring Light CCS Low Angle Ring Light (RED), 100mm x 70mm x 22mm, 12v/9.0w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR2132RDLA-00 |
Low Angle Ring Light (CCS) - 132mm outer diameter - low angle red ring light
- 12v/13w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR2170RDLA-00 |
Low Angle Ring Light (CCS) - 170mm outer diameter - low angle red ring light
- 12v/18w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR232RD-00 |
Direct Ring Light (CCS) - 32mm outer diameter - Red Ring Light
- 12v/1.5w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR250BL-00 |
Blue Direct Ring Light (CCS) - Outer diameter 50mm, Inner diameter 28mm
- 24v/4.1w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDR250RD-00 |
Direct Ring Light (CCS) - Outer diameter 50mm, Inner diameter 28mm
- 12v/3w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR250SW-00 |
White Direct Ring Light(CCS) Outer diameter, 50mm, Inner diameter 28mm
24v/4.1w
1 week lead-time
PREREQUISITES:Non-Strobed:
CLA-PD3024-00,CLAFCBx-00
Strobed:
CLA-PD3024-00,CLA-STU3000-00,CLAFCBx-00 or CLA-PTU3024,CLA-FCBx-00 |
| CLM-LDR270IR95-00 |
Infrared Direct Ring Light (CCS) - Outer diameter 70mm, Inner diameter 35mm
- 12v/5.3w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR270RD-00 |
Direct Ring Light (CCS) - Outer diameter 70mm, Inner diameter 28mm
- 12v/6w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR270SW-00 |
White Direct Ring Light (CCS) - Outer diameter 70mm, Inner diameter 35mm
- 24v/8.2w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDR274BLLA-00 |
Blue Low Angle Ring Light (CCS) - Outer diameter 74mm, Inner diameter 48mm
- 24v/6.1w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LDR274RDLA-00 |
Low Angle Ring Light (CCS) - 74mm outer diameter - low angle red ring light
- 12v/4.5w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR290RD-00 |
Direct Ring Light (CCS) - Outer diameter 90mm, Inner diameter 50mm
- 12v/9.5w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR290SW-00 |
White Direct Ring Light (CCS) - Outer diameter 90mm, Inner diameter 50mm
- 24v/15w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LDR75LA1-00 |
Dark Field Red Ring Light (CCS) - 75mm outer diameter dark field red light
- 12v/3w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LDR96LA1-00 |
Dark Field Red Ring Light (CCS) - 96mm outer diameter dark field red light
- 12v/3w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LFL100IR95-00 |
IR Back Light (CCS) - 100 x 80 IR Emitting surface size
- 12v/4.5w
- Lead Time is 5-6 weeks. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LFR100SW-00 |
Flat Diffused White Ring Light (CCS) - Outer diameter 102mm, Inner diameter 33mm
- 24v/4.9w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx
power supply -and- CLA-FCBx-00 cable. |
| CLM-LFR130-00 |
Flat Diffused Ring Light (CCS) - Outer diameter 125mm, Inner diameter 44mm
- 12v/4.5w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LFR200-00 |
Flat Ring - Diffused (CCS) - Outer diameter = 216, inner diameter = 70
- 12v/7.8w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx power supply -and- CLA-CBx-00 cable |
| CLM-LFV34-00 |
Coaxial Light (CCS) - 12v/2.9w
- 46mm x 46mm. PREREQUISITES: CLA-PD3012-00 power supply -or-CLA-PB2430-00 power supply -and-CLA-CBx-00 cable. |
| CLM-LFV34BL-00 |
Blue Coaxial Light (CCS) - Outer size 46mm x 46mm x 40mm
- FOV 10-25mm
- 24v/2.4w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3024-xx or CLA-PTU3024-xx power supply -and- CLA-FCBx-00 cable. |
| CLM-LFV50A-00 |
Diffuse Light (CCS) - 50mm diffuse light
- 12v/4.5w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LFV70A-00 |
Diffuse Light (CCS) - 70mm diffuse light
- 12v/8.4w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LFVCP18-00 |
Diffuse Light (CCS) - 18mm diffuse light
- 12v/1.2w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-LKR70A-00 |
Shallow Diffused Dome Light (CCS) - Outer diameter 74mm, Inner diameter 20mm
- 12v/3.0w. PREREQUISITES: Any In-Sight® series -and-
CLA-PD3012-xx or CLA-PTU3012-xx
power supply -and- CLA-CBx-00 cable. |
| CLM-LL1115630 |
Red Bar Light Monster Bar Light (Red), 11.5" |
| CLM-LND300HDF-00 |
CCS 301x12mm Diffused Line Light - 301x12mm Diffused Line Light
(High Intensity)
- 24v/7w. PREREQUISITES: CLA-PD3024 power supply -and-
CLA-FCBx-00 cable |
| CLM-LSP41RD-00 |
LED Spot Light (CCS) - Covers up to 50mm at a distance of 100mm
- 12v/1.6w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-MFU54X40BL-00 |
Collimated Back Light - Blue (CCS) - 74mm x 27mm bar light Blue -12v/5.4w. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-ML30-00 |
Adapter for CLM-HLV27BL-00. PREREQUISITES: CLM-HLV27BL-00 |
| CLM-PLLDL130X15-00 |
Polarizing Plate for 130mm Bar Light CCS - Attaches to 130mm x 15mm
Bar Lights from CCS. PREREQUISITES: |
| CLM-PLLDR270RD-00 |
Polarizing Plate for 70mm Ring Light CCS - Attaches to ring light to eliminate glare
from light. PREREQUISITES: CLK-LDR270RD-00 |
| CLM-PLLDR290RD-00 |
CCS Polarizer - For the LDR290 light in the
CLK-LDR290RD-00 kit. PREREQUISITES: CLM-LDR290B-00 |
| CLM-PLLSP41-00 |
CCS Polarizer for LED Spot Light Polarizer for CLM-LSP41RD-00 LED Spot Light (CCS). PREREQUISITES: CLM-LSP41RD-00 |
| CLM-PLRL55P-00 |
Polarizer for CLM-RL55630-00 Ring Light Polarizer for CLM-RL55630-00 Ring Light. PREREQUISITES: CLM-RL55630-00 |
| CLM-RL55630 |
RL 5.5" Monster Ring Light - Red |
| CLM-SP325630 |
3.25" Monster Spot Light - Red |
| CLM-SQR56-00 |
Ring Light - Square shaped housing (CCS) - 12v/3.0w
- 56mm outer diameter. PREREQUISITES: CLA-PD3012-00 power supply -or-
CLA-PB2430-00 power supply -and-
CLA-CBx-00 cable. |
| CLM-WLL1115630 |
Wash Down Linear Light (Red) - Size 11.5"
- Includes LDM DIN rail mounts, power supply,
and 4 meter cable. |
| CLM-WRL4660-00 |
Wash Down 4" Monster Ring Light - Red |
| CLM-WSP325630 |
3.25" Monster Wash Down Spot Light Red - Includes LDM DIN rail mount driver and
12" cable |
| CON-4T2 |
RS422 - RS232 CONVERTER. Note: RS422-RS232 converter |
| CON-8SI |
SERIES 800 SYNC INPUT CONN. Note: SERIES 800 SYNC INPUT CONN |
| CON-8SO |
SERIES 800 STROBE OUT CONN. Note: SERIES 800 STROBE OUT CONN |
| CON-9TM |
CON MOD ADP DB9F-RJ12. Note: SmartLink Serial Converter |
| CON-BRK |
DVT BREAK-OUT BOARD. Note: IO Breakout Board |
| CON-ETS |
SERIAL CONVERTER. Note: DVT Ethernet to Serial Converter |
| CON-IBOB |
DVT ISOLATION BREAK-OUT BOARD. Note: DVT ISOLATION BREAK-OUT BOARD |
| CON-IOE |
DVT EXTENDED I/O MODULE. Note: DVT Expanded IO Module |
| CON-IOE-BRK |
DVT CON-IOE BREAKOUT MODULE & PDM. Note: Series 500 BreakoutBoard |
| CON-RJ45N |
ETHERNET CROSS OVER CONNECTOR. Note: Ethernet Cross OverConnector |
| CPS-US-00 |
Power Supply (24vdc) US 24 volt Din Rail mountable industrial Power Supply with US power cordPREREQUISITES: Any In-Sight® Series |
| DMA-COVER/BELT-00 |
DataMan Belt Retractor Kit Consists of:
- DataMan Scanner Cover
- Web Belt with clip
- Swivel Retractor, 12oz. |
| DMA-COVER/OH-00 |
DataMan Overhead Retractor Kit Consists of: - DataMan Scanner Cover - Overhead PulleyPREREQUISITES: |
| DMA-DFC-00 |
DataMan 6500 Diffuser Cone. PREREQUISITES: Any DataMan 6500 |
| DMA-STAND-00 |
DataMan 6400/6500 Stand Stand for DataMan 6400 and 6500 Hand-held Readers |
| DMR-6400-00 |
DataMan™ 6400 Hand-held Reader |
| DMR-6500-00 |
DataMan™ 6500 Hand-held Reader |
| DMR-6500SHD-00 |
DataMan™ 6500SHD Hand-held Reader |
| DOC-G/S-INSIGHT-E |
Getting Started with In-Sight® - English |
| DOC-INSTALL1000-E |
Hardware Installation & Reference manual - English version |
| DOC-INSTALL2000-E |
Hardware Installation & Reference manual - English version |
| DOC-INSTALL3000-E |
Hardware Installation & Reference manual - English version |
| DOC-INSTALL3400-E |
Hardware Installation & Reference manual - English version |
| DOC-INSTALL4000-E |
Hardware Installation & Reference Manual - English |
| DOC-INSTALL5000-E |
Hardware Installation & Reference manual - English version |
| DOC-SAM |
DVT TRAINING EXAMPLE BOOK. Note: Training Example Book |
| DOC-SCR |
DVT SCRIPT REFERENCE MANUAL. Note: DVT Script Reference Manual |
| DOC-SRU |
DVT SMARTREADER USER MANUAL. Note: Smart Reader Guide |
| DOC-TRN |
DVT TRAINING MANUAL. Note: Training Example Book |
| DOC-USER |
DVT FRAMEWORK USERS GUIDE. Note: DVT FrameWork User Guide |
| DSCSPC |
SPECIAL DISCOUNT. Note: Special Discount - Internal DVT Use Only. |
| DSK-FWKCD |
CD FRAMEWORK SOFTWARE. Note: FRAMEWORK CD-ROM |
| DSK-INTLCD |
CD INTELLECT SOFTWARE. Note: INTELLECT CD-ROM |
| DSK-SLCD |
CD SMARTLINK SOFTWARE. Note: SMARTLINK CD |
| DSK-SRCD |
CD SMARTREADER SOFTWARE. Note: SmartReader Firmware and Software CD-ROM. |
| DVT-SL |
DVT SMARTLINK. Note: DVT SmartLink Display Driver |
| DVT-SLD |
DVT SMARTLINK DEVICENET. Note: DVT SmartLink with DeviceNet |
| DVT-SLP |
DVT SMARTLINK PROFIBUS. Note: DVT SmartLink with Profibus |
| HWP-ISS-12 |
Extended In-Sight Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 12 months. PREREQUISITES: Functional unit |
| HWP-ISS-24 |
Extended In-Sight Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 24 months. PREREQUISITES: Functional unit |
| HWP-ISS-36 |
Extended In-Sight Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 36 months. PREREQUISITES: Functional unit |
| HWP-ISS-6 |
Extended In-Sight Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 6 months. PREREQUISITES: Functional unit
Only available with initial purchase |
| HWP-ISS-SITE-12 |
Asset Management Programs See next page for descriptions and prices for the "Asset Management Program" |
| HWP-VDM-12 |
Extended DataMan Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 12 months. PREREQUISITES: Functional unit |
| HWP-VDM-6 |
Extended DataMan Hardware Sppt Program This program extends the length of the original 48 hour "Hot Swap" Program for an additional 6 months. PREREQUISITES: Functional unit Only available with initial purchase |
| IA00-10 |
ADV PWR SUP CURR SOURCE SINGLE PORT. Note: Ai, Constant Current Controller, Single Output |
| IA00-10IC |
ADV PWR SUP 24VDC CURR SRC W/INT CONT. Note: Ai, Constant Current Controller, Manual Adjustment, Single Output |
| IA00-15S |
ADV CBL SINGLE HEAD 15M EXT CABLE. Note: Ai, Extension Cable, 50' (15M) |
| IA00-21 |
ADV PWR SUP DUAL OUTPUT INT CONT. Note: Ai, RGB Mixing Controller, PC Interface, Dual Output |
| IA00-22 |
AI PWR SUP DUAL INT CONT W/USER INT. Note: Ai, RGB Mixing Controller, PC & Display Interface, Dual Output |
| IA00-30 |
ADV PWR SUP DUAL OUTPUT. Note: Ai, Constant Current Controller, Dual Output |
| IA00-30IC |
AI CURRENT SOURCE 2 OUTPUT W/INT CONTROL. Note: Ai, Constant Current Controller, Manual Adjustment, Dual Output |
| IA00-3S |
ADV CBL 10 EXTENSION CABLE". Note: Ai, Extension Cable, 10' (3M) |
| IA00-3Y |
ADV CBL 10 Y CABLE". Note: Ai, Extension Cable, Dual, 10' (3M) |
| IA00-40 |
ADV PWR SUP SINGLE PORT STROBE. Note: Ai, Strobe Controller, PC interface, Single Output |
| IA00-41 |
AI PWR SUP DC CUR SOURCE PC CTL. Note: Ai, Constant Current Controller, PC Interface, Dual Output |
| IA00-42S |
AI STD CONTSANT CURR PC & DISPLAY DUAL. Note: Ai, Constant Current Controller, PC & Display Interface, Dual Output |
| IA00-60 |
ADV PWR SUP DUAL PORT STROBE. Note: Ai, Strobe Controller, PC interface, Dual Output |
| IA00-60AS |
ADV PWR SUP DUAL OUT SEP IN STROBE. Note: Ai, Strobe Controller, PC interface, Asynchronous Trigger, Dual Output |
|
