Tech Support
CIMTEC Automation provides a wide range of Support options to help you with your GE IP PLC system.
Repairs
CIMTEC Automation expands our automation product support by providing a full repair center through our Qualitrol International division.
Authorized Supplier of GE Intelligent Platforms PLC Products - High-Tech Distributor Since 1987
|
GE Intelligent Platforms – PAC Systems RX3i |
The new GE IP PAC systems RX3i controller is the latest addition to the innovative PAC systems family of programmable automation controllers (PACs). Like the rest of the family, the PAC systems RX3i features a single control engine and universal programming environment to provide application portability across multiple hardware platforms and deliver a true convergence of control choices. Using the same control engine as the PAC systems RX7i, the new PAC systems RX3i offers a high level of automation functionality in a compact, cost-effective package. The PAC systems portable control engine provides high performance on several different platforms, allowing OEMs and end users with application variability to choose the exact control system hardware that best suits their needs.
GE IP PAC systems RX3i Features:
- High-speed processor and patented technology for faster throughput without information bottlenecks
- A universal backplane with a high-speed PCI bus running at 27 MHz for fast data throughput for complex I/O and a serial bus for simple I/O that optimizes performance and your investment. The universal backplane also supports HOT SWAP to minimize downtime.
- Celeron (Pentium III) 300 mHz CPU for advanced programming and performance with 10Mbytes memory
- Memory for ladder logic documentation and machine documentation in the controller to reduce downtime and improve troubleshooting
- Open communications support including Ethernet, GENIUS, Profibus, DeviceNet, and serial
Learn more about the revolutionary PAC RX3i from GE IP by clicking on a PAC bulletin listed below. Or click on a specific part number to learn more about a particular PAC RX3i module.
| Part #: | Description: | New | Reman | Repair | |
| IC695CMM004 | RX3i serial communications Module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. | $1,199.00 | $841.70 |  |
|
| IC695CMU310 | RX3i Redundant High Availability CPU with two built-in serial ports. TheCPU has 10Meg of user memory. The CPU supports the Max-ON redundancy code. | $5,828.00 | $3,147.07 | |
|
| IC695CPU310 | 300GEF.MHz CPU with 10Meg of memory 2 SERIAL PORTS (occupies two slots on sGEF.YStem base) | $3,100.00 | $1,354.05 | $2,112.32 | |
| IC695CPU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on sGEF.YStem base). External high capacity battery IC693ACC302 required. Estimate data retention is 30 daGEF.YS at 20C of continous battery back up. | $5,400.00 | $3,790.80 | |
|
| IC695CRU320 | 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on sGEF.YStem base) redundant CPU. External high capacity battery IC693ACC302 required. The CRU320 supports both Genius LAN and Ethernet LAN. Dual Genius LAN is not supported. | $5,950.00 | $4,176.90 | |
|
| IC695ETM001 | Ethernet Module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on sGEF.YStem base | $1,461.00 | $1,418.00 | $995.44 | |
| IC695HSC304 | RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch. | $868.00 | $591.08 | |
|
| IC695HSC308 | RX3i High Speed Counter, 8 channels. 16 configurable inputs and 14 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch. Module requires PCI bus. Requires terminal block IC694TBxx32. | $1,314.00 | $895.05 | |
|
| IC695LRE001 | RX3i Local Expansion Module Occupies no sGEF.YStem slots on base | $106.00 | $71.60 | |
|
| IC695NIU001 | RX3i NIU with two serial ports and 20K of local logic. Module requires Universal base (IC695CHSxxx) and requires Ethernet Module (IC695ETM001).NIU supports all RX3i I/O Modules. | $1,576.00 | $1,074.06 | |
|
| IC695NKT001 | RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet Module (IC695ETM001). ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base. | $1,839.00 | $1,253.07 | |
|
| IC695NKT002 | RX3i Ethernet NIU Kit with two Ethernet Modules. | $3,300.00 | $2,248.51 | |
|
| IC695PBM300 | RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The mo dule supports PROFIBUS V1 Master functionality. | $1,261.00 | $859.25 | |
|
| IC695PBS301 | RX3i Profibus Slave Module supports V1 functionality. | $1,130.00 | $770.09 | |
|
| IC695PSA040 | RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s GEF.YStem base. | $595.00 | $259.65 | $405.05 | |
| IC695PSA140 | 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsGEF.YStems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplan | $673.00 | $458.41 | |
|
| IC695PSD040 | RX3i 24VDC power supply, 40 watts. | $395.00 | $268.87 | |
|
| IC695PSD140 | Multipurpose Power Supply is suitable for use in load-sharing and redund ancy application. It must be installed in a PACsGEF.YStems RX3i (IC695catalog number) Universal Backplane. | $473.00 | $322.22 | |
|
| IC695RMX128 | RX3i Redundant Memory Xchange Module for High Availability. 2Megbytes of user shared memory. Dual Genius LAN is not supported. | $2,112.00 | $1,439.10 | |
|
| IC695STK001 | RX3i Power PACkage 1 Starter Kit includes RX3i with software. (includesRX3i with software. (includes one each IC695CPU310, IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.) Limited one RX3i starter kit | $4,508.00 | $3,071.95 | |