Industrial automation training and workshops
2020 PLC, Robot, Vision and Software Training Class Schedule
Our training classes are taught by factory-trained engineers with years of experience in the subject matter. In most classes, participants work at lab stations for a hands-on experience with the product.
None at this time |
None at this time |
Epson SPEL + Language Programming | February 2-4, 2021 Charlotte, NC |
$1795.00 / per student |
Epson SPEL + Language Programming | August 10-12, 2021 Greenville, SC |
$1795.00 / per student |
Epson SPEL + Language Programming | December 7-9, 2021 Charlotte, NC |
$1795.00 / per student |
Epson Maintenance Tech Programming | March 4-5, 2021 Charlotte, NC |
$1250.00 / per student |
Epson Maintenance Tech Programming | June 10-11, 2021 Greenville, SC |
$1250.00 / per student |
Epson Maintenance Tech Programming | October 14-15, 2021 Charlotte, NC |
$1250.00 / per student |
Epson Robot Controller Maintenance SCARA | March 2-4, 2021 Charlotte, NC |
$1795.00 / per student |
Epson Robot Controller Maintenance SCARA | June 8-10, 2021 Greenville, SC |
$1795.00 / per student |
Epson Robot Controller Maintenance SCARA | October 12-14, 2021 Charlotte, NC |
$1795.00 / per student |
Controller Maintenance |
June 15-17, 2021 Richmond, VA |
$1,900.00 per seat |
Controller Maintenance |
October 19-21, 2021 Charlotte, NC |
$1,900.00 per seat |
Controller Programming |
August 24-27, 2021 Richmond, VA |
$2,500.00 per seat |
None at this time |
MIR Programming |
June 22-23, 2021 Charlotte, NC |
$1,095.00 per seat |
MIR Programming |
November 9-10, 2021 Charlotte, NC |
$1,095.00 per seat |
None at this time |
None at this time |
UR Basic Training |
April 6-7, 2021 Charlotte, NC |
$1295.00 / per student |
UR Basic Training |
July 20-21, 2021 Charlotte, NC |
$1295.00 / per student |
UR Programming Worshop |
March 16, 2021 Greenville, SC |
$250.00 / per student |
UR Programming Worshop |
March 17, 2021 Greenville, SC |
$250.00 / per student |
UR Programming Worshop |
April 27, 2021 Charlotte, NC |
$250.00 / per student |
UR Programming Worshop |
June 8, 2021 Raleigh, NC |
$250.00 / per student |
UR Programming Worshop |
June 22, 2021 Richmond, VA |
$250.00 / per student |
UR Programming Worshop |
September 14, 2021 Greenville, SC |
$250.00 / per student |
UR Programming Worshop |
September 15, 2021 Greenville, SC |
$250.00 / per student |
UR Programming Worshop |
October 5, 2021 Charlotte, NC |
$250.00 / per student |
None at this time |
None at this time |
CIMTEC's Automation Workshops allow you to stay current with ever-changing Factory Automation technology and applications.
CIMTEC AUTOMATION TRAINING CANCELLATION POLICY:
Canceling or rescheduling at least 2 weeks prior to the start of class will allow us to fully refund tuition or apply credit to another class. With less than 2 weeks notice, cancellations are subject to a 75% fee and rescheduling is subject to a 50% fee. Full tuition will be charged for failing to show up for a class without notice or for leaving a class prematurely. Substitutions of one student for another who cannot make the class are accepted at any time, without charge.
Cimtec Automation reserves the right to cancel any course at least 2 weeks prior to the class. In this event, you will be notified and a full refund will be awarded. However, CIMTEC AUTOMATION IS NOT RESPONSIBLE FOR ANY EXPENSES RELATED TO NON-REFUNDABLE AIRLINE TICKETS OR TRAVEL ARRANGEMENTS. Please do not make non-refundable travel arrangements earlier than two weeks before the class start date.